SERAT TEBU SEBAGAI ZAT ADITIF BIOMASS DALAM FLUIDA PEMBORAN
DOI:
https://doi.org/10.53026/jepm.v4i1.46Keywords:
Fluida Pemboran, Loss Circulation Material, Biomasa, RheologiAbstract
Studi ini merupakan investigasi pertama mengenai potensi ampas tebu sebagai komponen dalam fluida pengeboran yang dapat mengurangi masalah dampak lingkungan dari industri minyak. Ampas tebu dihipotesiskan dapat berfungsi sebagai pengganti Loss Circulation Material (LCM), komponen yang berperan menjadi penghubung silang untuk bukaan pada formasi batuan dan menyumbat lubang yang dibor pada batuan. Penelitian dilakukan dengan menggunakan viscometer dan mud balance FANN dan kertas pH meter. Data yang didapatkan berupa densitas, viskositas, plastic viscosity, yield point dan pH. Berdasarkan data yang telah diperoleh, penambahan ampas tebu pada lumpur berbahan dasar air dapat menaikkan densitas lumpur. Sifat viskositas lumpur akan bertambah seiring dengan penambahan ampas tebu. Penambahan ampas tebunjuga akan menaikkan harga YP secara signifikan. Kesimpulannya, biomassa serat tebu merupakan aditif yang berpotensi baik untuk mengurangi kehilangan fluida pengeboran.
References
Al-Hameedi, A.T.T., Alkinani, H.H., Norman, S.D., Al-Alwani, M.A., Alshammari, A.F., Albazzaz, H.W., Alkhamis, M.M., Alashwak, N.F., & Mutar, R.A. “Insights into the application of new eco-friendly drilling fluid additive to improve the fluid properties in water-based drilling fluid systems”. Journal of Petroleum Science and Engineering. 2019. https://doi.org/10.1016/j.petrol.2019.106424
Salem, E., Knickerbocker, M.D., & Alashwak, N.F. “Laboratory Study of Environmentally Friendly Drilling Fluid Additives Banana Peel Powder for Modifying the Drilling Fluid Characteristics in Water-Based Muds”. Paper presented at the International Petroleum Technology Conference held in Dhahran, Saudi Arabia, 13 – 15 January 2020. https://doi.org/10.2523/IPTC-19964-MSJ.
Ambaye, T.G., Formicola, F., Sbaffoni, S., Lima, A.T.M., Franzetti, A., Vaccari, M. “Environmental and economic performance of chemical and biological processes for treating petroleum hydrocarbon-contaminated soil: An experimental study”. Journal of Environmental Chemical Engineering. 2024. https://doi.org/10.1016/j.jece.2024.113672
Antia, M., Ezejiofor, A.N., Obasi, C.N., & Orisakwe, O.E. “Environmental and public health effects of spent drilling fluid: An updated systematic review”. Journal of Hazardous Materials Advances. 2022. https://doi.org/10.1016/j.hazadv.2022.100120
Ezeakacha, C.P., & Salehi, S. “Investing impact of rock type and lithology on mud invasion and formation damage”. Paper presented at the SPE International Conference and Exhibition on Formation Damage Control, Lafayette, Louisiana, USA, February 2018. doi: https://doi.org/10.2118/189471-MS
Gao, X., Zhong, H.Y., Zhang, X.B., Chen, A.L., Qiu, Z.S., & Huang,W.A. “Application of sustainable basil seed as an eco-friendly multifunctional additive for water-based drilling fluids”. Petroleum Science. 2021. https://doi.org/10.1016/j.petsci.2021.05.005
Khan A., and Hamza A., “Local Materials Drilling Mud: A Laboratory Approach”. Proceedings of the 2021 International Petroleum and Petrochemical Technology Conference: 436–441. 2021. https://doi.org/10.1007/978-981-16-9427-1_43
Khan, A., Shahid, A.A., & Zahoor, M.K. “Sustainable Drilling Fluid Design; Utilizing Waste Biomass as Drilling Fluid Additive”. International Petroleum Technology Conference. 2024. DOI 10.2523/IPTC-24133-MS
Rahmati, M., Khosravi, M., & Tanha, A.A., "Evaluation of formation damage and filter cake removal with a new LPM drilling fluid additive”. Results in Engineering. 2024. https://doi.org/10.1016/j.rineng.2024.102656
Sachez, C. “Microbial capability for the degradation of chemical additives present in petroleum-based plastic products: A review on current status and perspectives”. Journal of Hazardous Materials. 2021.https://doi.org/10.1016/j.jhazmat.2020.123534
Thibodeaux, G.M., Baudoin, N.A., & Chirdon, W.M. “Investigation of proteinaceous algal biomass as a drilling fluid component”. Results in Engineering. 2023. https://doi.org/10.1016/j.rineng.2023.101364
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Jurnal Eksplorasi dan Produksi Migas
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
