UJI SCREENING POLIMER UNTUK PERSIAPAN INJEKSI KIMIA PADA RESERVOIR MINYAK RINGAN LAPANGAN X
DOI:
https://doi.org/10.53026/qdcber71Keywords:
Chemical EOR, Enhanced Oil Recovery, Hydrolyzed Polyacrylamide, Screening PolimerAbstract
Lapangan X mengalami penurunan performa produksi meskipun program waterflooding telah lama diterapkan, sehingga diperlukan metode Enhanced Oil Recovery (EOR) tahap lanjut. Chemical EOR melalui injeksi polimer dapat meningkatkan viskositas fluida injeksi dan memperbaiki mobility ratio, tetapi kesesuaian polimer perlu diuji terlebih dahulu. Uji skrining awal terhadap tiga polimer Hydrolyzed Polyacrylamide (HPAM), yaitu AM 31, AL 22, dan JW 05, dilakukan melalui uji kompatibilitas, viskositas, filtrasi, dan screen factor pada konsentrasi 500–2000 ppm dalam brine NaCl 15.000 ppm pada suhu 60°C. Pengujian menunjukkan bahwa seluruh sampel kompatibel dengan brine. Konsentrasi 1500 ppm dipilih sebagai titik pembanding karena merupakan konsentrasi terendah yang membuat viskositas ketiga polimer (11,01; 11,24; dan 14,33 cP) melampaui viskositas minyak Lapangan X (6,3 cP). Pada konsentrasi tersebut, seluruh polimer lolos uji filtrasi dengan FR 0,952 (untuk AM 31), 1,099 (untuk AL 22), dan 1,163 (untuk JW 05). Screen factor-nya berturut-turut 38,90; 48,86; dan 57,95. JW 05 unggul pada viskositas dan screen factor, tetapi FR-nya paling mendekati ambang batas. AM 31 dipilih sebagai kandidat prioritas karena FR terendah dan waktu alir tersingkat dengan viskositas hampir sama dengan AL 22, sehingga risiko penyumbatan pori paling kecil. Hasil ini menjadi dasar pengujian lanjutan sebelum pilot test.
References
[1] D. W. Green dan G. P. Willhite, Enhanced Oil Recovery. Richardson, Texas: Society of Petroleum Engineers, 1998.
[2] J. J. Sheng, Modern Chemical Enhanced Oil Recovery: Theory and Practice. Amsterdam: Gulf Professional Publishing, Elsevier, 2011.
[3] C. H. Gao, "Scientific research and field applications of polymer flooding in heavy oil recovery," Journal of Petroleum Exploration and Production Technology, vol. 1, no. 2–4, pp. 65–70, 2011.
[4] S. Thomas, "Enhanced oil recovery: An overview," Oil & Gas Science and Technology, vol. 63, no. 1, pp. 9–19, 2008.
[5] M. A. Khamis, O. A. Omer, F. S. Altawati, dan M. A. Almobarky, "A hybrid ionic liquid–HPAM flooding for enhanced oil recovery: An integrated experimental and numerical study," Polymers, vol. 18, no. 3, art. 359, 2026.
[6] K. G. Salem, A. M. Salem, M. A. Tantawy, A. A. Gawish, S. Gomaa, dan A. N. El-hoshoudy, "A comprehensive investigation of nanocomposite polymer flooding at reservoir conditions: New insights into enhanced oil recovery," Journal of Polymers and the Environment, vol. 32, no. 11, pp. 5915–5935, 2024.
[7] M. S. Mousapour et al., "Dynamics of HPAM flow and injectivity in sandstone porous media," Scientific Reports, vol. 14, art. 28720, 2024.
[8] M. Damanik, S. Kasmungin, dan R. Sudibjo, "Study peningkatan oil recovery pada injeksi surfaktan-polimer pada batuan karbonat," Jurnal Penelitian dan Karya Ilmiah Lembaga Penelitian Universitas Trisakti, vol. 3, no. 1, p. 27, 2018.
[9] R. S. Seright, "How much polymer should be injected during a polymer flood? Review of previous and current practices," SPE Journal, vol. 22, no. 1, pp. 1–18, 2017.
[10] J. J. Taber, F. D. Martin, dan R. S. Seright, "EOR screening criteria revisited—Part 1: Introduction to screening criteria and enhanced recovery field projects," SPE Reservoir Engineering, vol. 12, no. 3, pp. 189–198, 1997.
[11] H. Wicaksono, Sutijan, dan A. T. Yuliansyah, "Karakterisasi larutan polimer KYPAM HPAM untuk bahan injeksi dalam enhanced oil recovery (EOR)," Jurnal Rekayasa Proses, vol. 9, no. 1, pp. 9–15, 2015.
[12] J. Verma dan A. Mandal, "Potential effective criteria for selection of polymer in enhanced oil recovery," Petroleum Science and Technology, vol. 40, no. 7, pp. 879–892, 2022.
[13] R. S. Seright dan D. Wang, "Polymer flooding: Current status and future directions," Petroleum Science, vol. 20, no. 2, p. 911, 2023.
[14] Saleh, L. D., Wei, M., & Bai, B. (2014). Data analysis and updated screening criteria for polymer flooding based on oilfield data. SPE Reservoir Evaluation & Engineering, 17(1), 15-25.
[15] C. Gao, "Viscosity of partially hydrolyzed polyacrylamide under shearing and heat," Journal of Petroleum Exploration and Production Technology, vol. 3, pp. 203–206, 2013.
[16] S. Gerry et al., "Parameter analysis of polymer on sandstone reservoir in Indonesia: An experimental laboratory study," Scientific Contributions Oil and Gas, vol. 45, no. 3, pp. 27–38, 2022.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Jurnal Eksplorasi dan Produksi Migas

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

