ANALISIS PENENTUAN KUALITAS DAN KUANTITAS MINYAK PADA LAPANGAN X MENGGUNAKAN METODE ASTM-D4007
DOI:
https://doi.org/10.53026/jepm.v4i1.58Keywords:
Basic, sediment and water (BS&W), Centrifuge, Kualitas minyakAbstract
Penentuan kualitas minyak mentah merupakan langkah penting dalam memastikan efisiensi proses pengolahan dan distribusi. Penelitian ini bertujuan untuk menganalisis kadar Basic Sediment and Water (BS&W) pada sampel minyak dari Lapangan X menggunakan metode centrifuge. Sampel minyak yang diuji diambil dari berbagai titik di lapangan untuk mendapatkan gambaran representatif mengenai kualitas minyak. Pengukuran kadar BS&W dilakukan dengan memanfaatkan prinsip pemisahan fase melalui gaya sentrifugal sesuai standar ASTM D4007. Hasil analisis menunjukkan bahwa sebagian besar sampel memiliki kadar BS&W di bawah 40%, menunjukkan kualitas minyak yang stabil dan layak untuk diproses lebih lanjut. Namun, terdapat sampel yang menunjukkan kadar BS&W tinggi, menandakan perlunya treatment tambahan sebelum pengolahan. Penelitian ini menegaskan pentingnya monitoring kadar BS&W dalam pengelolaan minyak mentah untuk memastikan kualitas produk.
References
Kimray Inc., What is BS&W in Oil Production?, Kimray Training Resources, 2021.
Petro Online, What Determines the Quality of Oil?, 2022.
Huda Adil, Oil and Gas Field Processing, Al-Mustaqbal University College, 2022.
Pertamina EP, Petunjuk Teknis Pengukuran BS&W di Lapangan Produksi, Dokumen Internal, 2021.
Melysa, R. et al., “Optimizing Oil Production at the Gathering Station by Maintaining Oil Quality Using ROC System,” Jurnal REM, Vol. 4 No. 1, 2021.
API Manual of Petroleum Measurement Standards (Chapter 10.4), “Determination of Sediment and Water in Crude Oil by the Centrifuge Method,” American Petroleum Institute, 2016.
ASTM D96-17, Standard Test Methods for Water and Sediment in Crude Oil by Centrifuge Method (Laboratory Procedure), ASTM International, 2017.
ASTM D4007-20, Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Field Procedure), ASTM International, 2020.
Sucipto, E. & Suryono, R., “Analisis Kadar BS&W pada Crude Oil Menggunakan Metode Centrifuge di Lapangan X,” Jurnal Energi dan Produksi Migas, Vol. 5 No. 2, 2020.
SPE Paper #184573, “Comparison of Field BS&W Measurement Techniques,” Society of Petroleum Engineers, 2017.
ASTM D96-17, Standard Test Methods for Water and Sediment in Crude Oil by Centrifuge Method (Laboratory Procedure), ASTM International, 2017.
ASTM D4007-20, Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Field Procedure), ASTM International, 2020.
API Manual of Petroleum Measurement Standards (Chapter 10.4), “Determination of Sediment and Water in Crude Oil by the Centrifuge Method,” American Petroleum Institute, 2016.
Pertamina EP, Petunjuk Teknis Pengukuran BS&W di Lapangan Produksi, Dokumen Internal, 2021.
Pertamina EP, PPT Quantity Accounting System, 2012.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Jurnal Eksplorasi dan Produksi Migas
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
